• Lector can be mounted on the top or front of the bin housing (depending on the device’s requirements).
** Electronic devices are not included with the e-bin housing. As manufacturers of the metal bind-housing, we offer the integration of these systems under two modalities:
– Customer-supplied: The customer provides the devices of their choice, and we take care of integrating them into the container during the manufacturing process.
– Cervic Advice: If you do not have these systems, we can recommend suppliers so you can purchase the ideal devices for your project.
• Lector can be mounted on the top or front of the bin housing (depending on the device’s requirements).
• Bin housing suitable to hold a wheelie bin of 360 liters (wheelie bin not included).
• Foot-pedal operated lid with soft-close system (with large & intuitive pedal drive that covers all front to make easier to end user to
press it).
• Self-closing lid located at the top of the bin housing (featured with rainproof system and large opening)
• Vandal-proof: Foot-pedal drive with system to prevent intentional breakage of the lid opening system.
• Two door emptying access versions: Frontal Door or Rear Door.
• Door with protected access through two key-locks.
• Door can open to the left or right, configurable by the customer according to location requirements.
• On the rear door version, three pedal height adjustments are available: 90, 150, and 210 mm from the ground. This can be
configured on-site by the customer according to the location requirements, making it ideal for placement in the roadway to save
the curb step, areas with snow on the ground, etc .
• Compatible with plastic wheelie bins of 360L compliant with UNE 840 standard.
• Accessibility: in the rear door version the height of the lid to deposit the waste is placed less than 1200 mm from the ground (in
accordance with accessibility order TMA/851/2021.
• Incorporates waste identification: color, symbol, and name of the waste.
• It incorporates ventilation grilles at the rear.
• Robust construction and compact dimensions, with all rounded edges, assembled using concealed rivets and screws that allow
for easy replacement of parts in case of damage or breakage.
• Accessory (optional): padlock support and a high-security padlock.
• Opening to deposit measures 420 x 350 mm
• Made of hot-dip galvanized steel sheets of 1, 1.5, and 3 mm thicknesses and hinge elements made of 304 stainless steel.
• Finished with thermosetting polyester powder coating with a zinc-rich anti-corrosive primer applied to thick parts and those with
high user or collector contact, such as the pedal, and the manual handle on the user lid.
• Adjustable legs allow for height adjustments of up to 40mm.
• Can be anchored to the ground from inside using four M8 expansion bolts (included).
• Suitable to be used indoor and outdoor under normal weather conditions. In case of extreme weather conditions, such as high
salinity, temperature or humidity, an additional special treatment can be applied. Check extra cost and MOQ.
• Bin housing suitable to hold a wheelie bin of 360 liters (wheelie bin not included).
• Foot-pedal operated lid with soft-close system (with large & intuitive pedal drive that covers all front to make easier to end user to
press it).
• Self-closing lid located at the top of the bin housing (featured with rainproof system and large opening)
• Vandal-proof: Foot-pedal drive with system to prevent intentional breakage of the lid opening system.
• Two door emptying access versions: Frontal Door or Rear Door.
• Door with protected access through two key-locks.
• Door can open to the left or right, configurable by the customer according to location requirements.
• On the rear door version, three pedal height adjustments are available: 90, 150, and 210 mm from the ground. This can be
configured on-site by the customer according to the location requirements, making it ideal for placement in the roadway to save
the curb step, areas with snow on the ground, etc .
• Compatible with plastic wheelie bins of 360L compliant with UNE 840 standard.
• Accessibility: in the rear door version the height of the lid to deposit the waste is placed less than 1200 mm from the ground (in
accordance with accessibility order TMA/851/2021.
• Incorporates waste identification: color, symbol, and name of the waste.
• It incorporates ventilation grilles at the rear.
• Robust construction and compact dimensions, with all rounded edges, assembled using concealed rivets and screws that allow
for easy replacement of parts in case of damage or breakage.
• Accessory (optional): padlock support and a high-security padlock.
• Opening to deposit measures 420 x 350 mm
• Made of hot-dip galvanized steel sheets of 1, 1.5, and 3 mm thicknesses and hinge elements made of 304 stainless steel.
• Finished with thermosetting polyester powder coating with a zinc-rich anti-corrosive primer applied to thick parts and those with
high user or collector contact, such as the pedal, and the manual handle on the user lid.
• Adjustable legs allow for height adjustments of up to 40mm.
• Can be anchored to the ground from inside using four M8 expansion bolts (included).
• Suitable to be used indoor and outdoor under normal weather conditions. In case of extreme weather conditions, such as high
salinity, temperature or humidity, an additional special treatment can be applied. Check extra cost and MOQ.
